Fruit and vegetable

Others / Special

Others / Special (Fruit and Vegetable)

MCMs

The orchard balcony is a machine designed to support fruit picking and care work in orchards. Thanks to it, it is possible to significantly increase the efficiency of work and improve the comfort of performing individual activities related to harvesting and care of the orchard. The orchard balcony is designed to work with tractors with front or rear forklift truck mounted. The maximum lifting height depends on the lifting height of the front loader with which the orchard balcony works. The maximum lifting capacity of the working platform is 700 kg. The balcony can accommodate up to 2 people. The structure of the machine is made of welded and bolted steel elements.

Orchard platform

The trailer has been designed to work with class 0.6T and above tractors. It is designed to transport boxes with fruit, vegetables and other loads encountered in agriculture from the place of harvest to the place of unloading. The machine's structure is made of welded and bolted steel elements. Adjustable height of the drawbar provides the possibility of adjusting the trailer hitch to each type of tractor.&nbsp;

One axle orchard trailer with 1.5 capacity (380 cm)

One axle orchard trailer with 1.5 capacity (420 cm)

Hidraulic aggregate&nbsp; - it allows the use of a hoe &nbsp;with tractors that do not have suffcient pump capacity - joystick - two divider operating sections - adjustable output with CBM &nbsp;cat 2 hooks

Hydraulic aggregate 

Selmar

The straw blower machine is a device that facilitates and accelerates the spring straw spreading procedure between rows of strawberries. The device through the use of a cutting rotor and three outlet channels allows spreading of crushed straw simultaneously in three furrows between rows. With the use of a bedding machine, straw after the season is easier to remove and biodegrades faster, while the bedding machine is definitely more economical than traditional straw spreading. The device is equipped with two folding platforms for collecting straw and additionally they can be equipped with support wheels protecting against overloading the tractor lift and stabilizing the machine. - the machine is used to crush straw cubes - possibility of blowing using 2 out 3 outlet pipes - adjuctable support wheels - adjustable outlet pipes

Trailed straw spreader for square bales (cardan driven, max. 3 outlet)

One axle orchard trailer with 2.5 capacity (510 cm)

The box tippler is a stationary device powered from a 400 V electrical system with a minimum current of 2.5 kW. It is used in a technological line for emptying boxes of fruit or vegetables. It is equipped with an electric motor and a system of contactors and limit switches, which allows to work without using physical force of the operators. The machine is designed to work in temperatures from +5° to +40° C with air humidity of 50% at 40° C or 90% at 20° C. The tippler must not work in conditions of high contamination, e.g. chicken, acids, corrosive gases, salt, etc. The control is performed by means of up, down and STOP buttons installed in the cassette, which is portable within the radius of 3 m from the working tippler. The pallet boxes can be inserted into the device with a forklift truck or manual pallet loader. The tippler is equipped with a chute and side valves lined with soft material, which prevents the fruit or vegetables from crumpling and bending. - soft cladding - adjustable chute height - handles for transport with forklift

Stationary electric box tippler (max. 500 kg lift capacity)

Discharge trailer is designed for transporting fruits or vegetables from orchard to unloading place. Roller rayl on platform and on back side enables self-loading and unloading without any equipment or additional machines. - road lightning - hidraulically adjustable trailer height - rolls for easy moving of the pallet - torison hitch

Orchard single axle trailer (1500 kg capacity)

Orchard single axle trailer (2500 kg capacity)

The root cutter is a machine mounted on a three-point linkage (three-point linkage) designed to work with agricultural tractors of 0.6 ÷ 0.9T class. The machine is used to cut the roots of fruit trees, which is an extremely effective method of limiting the growth of fruit trees. Treatments performed with the root cutter are extremely fast and effective. Thanks to the hydraulically adjustable working width and depth, the machine can work in different pitch and its control is simple and takes place from the tractor operator's seat. The structure of the machine is made of welded and bolted steel elements. - angle adjustment - hidraulic sideshift - support roller - trimmer-knife made of steel with increased resistance to abrasion - hidraulic adjustment of trimmering depth

Rear mounted root trimmer (min. 88 HP)

Orchard platform is designed for fruit harvesting, branches pruning, caring and other actions in top parts of fruit trees. Using orchard platforms increase quality and efficiency and highly reduces time. Adjustable construction enables to lift platform with workers, bins and equipment on 2,6 m height. Orchard platform is designed for work with 0,6T+ class tractors with hydraulic system. Machine hydraulic system is powered from tractor hydraulic system. Steering is realised with hydraulic divider mounted on tractor or platform. Roller rayl enables easy moving bins along platform. Machine construction enables easy loading and unloadin three bins. During work with max. number of worker the must take places symetrically on both sides of the platform (for better balance). options - hidraulic extension of platforms - lift and roll - rolls of box pallets gantry

Single axle trailer for orchards (adjustable working height)

The strawberry mulching machine is a device that facilitates and accelerates the spring straw spreading procedure between rows of strawberries. The device through the use of a cutting rotor and three outlet channels allows spreading of crushed straw simultaneously in three furrows between rows. With the use of a bedding machine, straw after the season is easier to remove and biodegrades faster, while the bedding machine is definitely more economical than traditional straw spreading. The device is equipped with two folding platforms for collecting straw and additionally they can be equipped with support wheels protecting against overloading the tractor lift and stabilizing the machine. - the machine is used to crush straw cubes - possibility of blowing using 2 out 3 outlet pipes - adjuctable support wheels - adjustable outlet pipes - an innovative system for the regulation of the degree of straw fragmentation covered by patent protection

Trailed straw spreader for round bales (cardan driven, max. 3 outlet)

Orchard platform is designed for fruit harvesting, branches pruning, caring and other actions in top parts of fruit trees. Using orchard platforms increase quality and efficiency and highly reduces time. Adjustable construction enables to lift platform with workers, bins and equipment on 2,6 m height. Orchard platform is designed for work with 0,6T+ class tractors with hydraulic system. Machine hydraulic system is powered from tractor hydraulic system. Steering is realised with hydraulic divider mounted on tractor or platform. Roller rayl enables easy moving bins along platform. Machine construction enables easy loading and unloadin three bins. During work with max. number of worker the must take places symetrically on both sides of the platform (for better balance). options - hidraulic extension of platforms&nbsp; - lift and roll&nbsp; - rolls of box pallets gantry&nbsp;

Dual axle (tandem) trailer for orchards (adjustable working height)

Dual axle trailer for orchards (adjustable working height)

The UZP-350/4 air heater is a heating device used to protect fruit trees and soft fruit crops against spring frosts. The protection consists in traveling with the device using an agricultural tractor in rows of trees or shrubs every 20-25 meters and heating and mixing air when the temperature drops below 0 ° C. During the journey, the fan and oil burners in the heater start. The air is sucked through the upper tube intake from a height of 4 meters from the ground, where the temperature is higher than in the lower parts of trees and shrubs. During this time, oil burners with a power of 350 kW produce a stream of hot air, which is directed through the blowing channels to the blinds. Before the blinds, the fan chamber mixes the hot air produced by oil burners with the cooler air sucked in by the fan, after which the mixed air streams (temperature around 60 ° C - 80 ° C) are forced through the blinds outside (10 m3 / s). The range of the stream is about 10 - 12 m one way (two sides about 24 m). The blow chambers additionally act as heat exchangers. The UZP-350/4 heating device has a retractable travel axle, which when extended increases the distance between the road wheels ensuring greater stability as well as enabling the device to be adapted to rows in crops e.g. strawberries. The upper part of the air intake is hydraulically folded, which reduces its height to 2.8 m, facilitating the transport and storage of the machine and allowing the device to be used in orchards where anti-hail nets are stretched. The UZP-350/4 heating device attached to an agricultural tractor with an agricultural lower hitch consists of a support frame supported on road wheels with adjustable wheel track and a chamber (box housing) with hinged louvers (air flow guides) in the side walls. The chamber has arc blast ducts directed to the tilting louvers (serving as heat exchangers). Centrally above the blowing channels in a horizontal position there is a fan connected to the drive shaft from the tractor through an angular gear. Above the fan there is a built-in air intake. There are two oil burners on the rear wall in volts of the blow ducts. Above the burners housing there are tanks for diesel with a total capacity of 160 liters. Control and power supply of burners is located in the electric control box which is attached from the farm tractor side. The tractor operator with the heater has the ability to observe the air outlet temperature as well as turn the burners on or off during work passes. - folded intake that facilitates storage and transport - two fuel tanks (2x80L) - lighting - adjustable axle width - self loading - mounted battery - torison hitch - hot air generator is a machine that prevents the negavtive effects of frosts. Its operation is based collecting warmer air from a height of 4m, heating it with the help of oil bumers and then disperrsed at the height of plantings